Autor(es):
Oliveira, A. L. 
; Malafaya, P. B. ; Costa, S. A. ; Sousa, R. A. ; Reis, R. L.
Data: 2007
Identificador Persistente: http://hdl.handle.net/1822/13894
Origem: RepositóriUM - Universidade do Minho
Detalhes do Documento
Micro-computed tomography (μ-CT) as a potential tool to assess the effect of dy...
Descrição
This work studies the influence of dynamic biomimetic coating procedures on the growth of bonelike apatite layers at the surface of starch/polycaprolactone (SPCL) scaffolds produced by a 3D-plotting technology. These systems are newly proposed for bone Tissue Engineering applications. After generating stable apatite layers through a sodium silicate-based biomimetic methodology the scaffolds were immersed in Simulated Body Fluid solutions (SBF) under static, agitation and circulating flow perfusion conditions, for different time periods. Besides the typical characterization techniques, Micro-Computed Tomography analysis (μ-CT) was used to assess scaffold porosity and as a new tool for mapping apatite content. 2D histomorphometric analysis was performed and 3D virtual models were created using specific softwares for CT reconstruction. By the proposed biomimetic routes apatite layers were produced covering the interior of the scaffolds, without compromising their overall morphology and interconnectivity. Dynamic conditions allowed for the production of thicker apatite layers as consequence of higher mineralizing rates, when comparing with static conditions. μ-CT analysis clearly demonstrated that flow perfusion was the most effective condition in order to obtain well-defined apatite layers in the inner parts of the scaffolds. Together with SEM, this technique was a useful complementary tool for assessing the apatite content in a non-destructive way.
This work studies the influence of dynamic biomimetic coating procedures on the growth of bonelike apatite layers at the surface of starch/polycaprolactone (SPCL) scaffolds produced by a 3D-plotting technology. These systems are newly proposed for bone Tissue Engineering applications. After generating stable apatite layers through a sodium silicate-based biomimetic methodology the scaffolds were immersed in Simulated Body Fluid solutions (SBF) under static, agitation and circulating flow perfusion conditions, for different time periods. Besides the typical characterization techniques, Micro-Computed Tomography analysis (μ-CT) was used to assess scaffold porosity and as a new tool for mapping apatite content. 2D histomorphometric analysis was performed and 3D virtual models were created using specific softwares for CT reconstruction. By the proposed biomimetic routes apatite layers were produced covering the interior of the scaffolds, without compromising their overall morphology and interconnectivity. Dynamic conditions allowed for the production of thicker apatite layers as consequence of higher mineralizing rates, when comparing with static conditions. μ-CT analysis clearly demonstrated that flow perfusion was the most effective condition in order to obtain well-defined apatite layers in the inner parts of the scaffolds. Together with SEM, this technique was a useful complementary tool for assessing the apatite content in a non-destructive way.
Tipo de Documento
Artigo
Idioma Inglês
Idioma Inglês
| Financiadores do RCAAP | |||||||
|
|
|
|
|
|
||