Autor(es):
Teixeira, Cristina 
; Covas, J. A. ; Stützle, Thomas ; Gaspar-Cunha, A.
Data: 2010
Identificador Persistente: http://hdl.handle.net/1822/18568
Origem: RepositóriUM - Universidade do Minho
Detalhes do Documento
Optimization of Co-rotating twin-screw extruders using pareto local search
Descrição
A Pareto Local Search (PLS) algorithm was developed and applied to the screw configuration of co-rotating twin-screw extruders. This problem can be seen as a sequencing problem where a set of different screw elements are to be sequentially positioned along the screw in order to maximize the extruder performance. The results obtained were compared with previous results obtained with a Multi-Objective Evolutionary Algorithm (MOEA), which was previously developed by the authors. These results show that the PLS algorithm, despite its conceptual simplicity, is able to generate screws with good performance.
A Pareto Local Search (PLS) algorithm was developed and applied to the screw configuration of co-rotating twin-screw extruders. This problem can be seen as a sequencing problem where a set of different screw elements are to be sequentially positioned along the screw in order to maximize the extruder performance. The results obtained were compared with previous results obtained with a Multi-Objective Evolutionary Algorithm (MOEA), which was previously developed by the authors. These results show that the PLS algorithm, despite its conceptual simplicity, is able to generate screws with good performance.
Tipo de Documento
Documento de conferência
Idioma Inglês
Idioma Inglês
| Financiadores do RCAAP | |||||||
|
|
|
|
|
|
||