Document details

Ancient clay bricks : manufacture and properties

Author(s): Fernandes, Francisco M. cv logo 1 ; Lourenço, Paulo B. cv logo 2 ; Castro, F. cv logo 3

Date: 2010

Persistent ID: http://hdl.handle.net/1822/17132

Origin: RepositóriUM - Universidade do Minho


Description
The physical, mechanical and chemical properties of ancient fired clay bricks are addressed. A literature survey is carried out and samples of old Portuguese bricks dated from the 12th to 18th centuries are considered. A high porosity (15-40 %) and water absorption (10-20 %) is found. The suction rate can be rather high (up to 0.35 g/cm2/min), while the specific mass is low (1,500 to 1,800 kg/m3). The compressive strength shows a huge scattering with frequent values ranging from 1.5 to 30 N/mm2. In general, raw clays used in old clay bricks seem to have some consistency with respect to proportion of the main chemical constituents, while bricks of the same origin generally exhibit a strong chemical similarity. Finally, it is shown that a minor-destructive test (microdrilling) allows to adequately assess the compressive strength of old clay bricks, using appropriate correlations.
Document Type Part of book or chapter of book
Language English
delicious logo  facebook logo  linkedin logo  twitter logo 
degois logo
mendeley logo

Related documents



    Financiadores do RCAAP

Fundação para a Ciência e a Tecnologia Universidade do Minho   Governo Português Ministério da Educação e Ciência Programa Operacional da Sociedade do Conhecimento EU