ZnO films doped with vanadium (ZnO:V) have been prepared by dc reactive magnetron sputtering technique at different substrate temperatures (RT–500 C). The effects of the substrate temperature on ZnO:V films properties have been studied. XRD measurements show that only ZnO polycrystalline structure has been obtained, no V2O5 or VO2 crystal phase can be observed. It has been found that the film prepared at low s...
TiO2 nanorod films have been deposited on ITO substrates by dc reactive magnetron sputtering technique. The structures of these nanorod films were modified by the variation of the oxygen pressure during the sputtering process. Although all these TiO2 nanorod films deposited at different oxygen pressures show an anatase structure, the orientation of the nanorod films varies with the oxygen pressure. Only a very ...
Indium tin oxide (ITO) thin films have been deposited onto glass substrates at room temperature by ion beam assisted deposition technique at different deposition rates (0.1 -- 0.3 nm/s). The effects of the deposition rate on the structural, optical and electrical properties of the deposited films have been studied. The optical constants of the deposited films were calculated by fitting the transmittance spectra...
Indium tin oxide (ITO) thin films have been deposited onto acrylics (PMMA) substrates by ion beam assisted deposition technique at different oxygen flows. The structural, optical and electrical properties of the deposited films have been characterized by X-ray diffraction, transmittance, FTIR, ellipometry and Hall effect measurements. The optical constants of the deposited films have been calculated by fitting ...
Indium tin oxide (ITO) films have been deposited onto glass substrates at room temperature by ion beam assisted deposition technique (IBAD) at different ion beam currents (80 mA – 120 mA). The effect of the ion beam current on films properties has been studied. The films prepared at low ion beam current (80 mA) show an almost amorphous structure. As the ion beam current is increased, films show a preferred orie...
Indium tin oxide (ITO) thin films have been deposited onto polycarbonate substrates by ion beam assisted deposition technique at room temperature. The structural, optical and electrical properties of the films have been characterized by X-ray diffraction, atomic force microscopy, optical transmittance, ellipsometric and Hall effect measurements. The effect of the ion beam energy on the properties of the films h...
Financiadores do RCAAP | |||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |