We present a resistive plate chamber (RPC) prototype for time-of-flight measurements over large areas and at high occupancies, minimizing the inter-channel cross-talk. ; http://www.sciencedirect.com/science/article/B6TJM-4D75GPD-9/1/a6fe40c114a867a0f98e2fec0f133503
We show the feasibility of large area timing RPC detectors for experiments dealing with fragmentation-like primary interactions and/or high detector multiplicities, without significative degradation of the detector capabilities. The tested prototype is constituted by three independent cells placed into grounded aluminium boxes, which reduce the cross-talk to the level of 0.4%. Each box consists of a 4-gap glass...
This paper discusses hadron energy reconstruction for the ATLAS barrel prototype combined calorimeter (consisting of a lead-liquid argon electromagnetic part and an iron-scintillator hadronic part) in the framework of the non-parametrical method. The non-parametrical method utilizes only the known e/h ratios and the electron calibration constants and does not require the determination of any parameters by a min...
A new combined test of an electromagnetic liquid argon accordion calorimeter and a hadronic scintillating-tile calorimeter was carried out at the CERN SPS. These devices are prototypes of the barrel calorimeter of the future ATLAS experiment at the LHC. The energy resolution of pions in the energy range from 10 to 300 GeV at an incident angle [theta] of about 12° is well described by the expression , where E is...
Here, we report on a particular type of RPC that presents up to 99% efficiency for minimum ionizing particles and a very sharp time resolution, below 50 ps [sigma] in the most optimized conditions. Our 9 cm2 cells, made with glass and metal electrodes that form accurately spaced gaps of a few hundred micrometers, are operated at atmospheric pressure in non-flammable gases and can be economically produced in lar...
The lateral and longitudinal profiles of hadronic showers detected by a prototype of the ATLAS Iron-Scintillator Tile Hadron Calorimeter have been investigated. This calorimeter presents a unique longitudinal configuration of scintillator tiles. Using a fine-grained pion beam scan at 100 GeV, a detailed picture of transverse shower behaviour is obtained. The underlying radial energy densities for the four depth...
Prototypes of the FERMI system have been used to read out a prototype of the ATLAS hadron calorimeter in a beam test at the CERN SPS. The FERMI read-out system, using a compressor and a sampling ADC, is compared to a standard charge integrating read-out by measuring the energy resolution of the calorimeter separately with the two systems on the same events. ; http://www.sciencedirect.com/science/article/B6TJ...
Financiadores do RCAAP | |||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |