An analytical framework for describing the RPC behavior under high irradiation is proposed, including the effect of the fluctuations of the field. The description is compared with an equivalent MC and data for timing RPCs, showing good agreement. Moreover, the formalism allows to clearly identify the main variables ruling the process. ; http://www.sciencedirect.com/science/article/B6TVD-4KV4MR8-W/1/788b06292...
In this study, we demonstrate a strong influence of the working temperature on the counting rate capability of large-area timing resistive plate chambers (RPCs) incorporating industrial flat glass electrodes. The effect relies on the sharp dependence of glass resistivity on temperature, approximately one order of magnitude for each 25 °C, allowing a considerable extension of the counting rate capability merely ...
Timing RPCs are Resistive Plate Chambers made with glass and metal electrodes separated by precision spacers. Typical gas gaps are a few hundred micrometers wide. Such counters were introduced in 1999 and have since reached timing accuracies below 50 ps [sigma] with efficiencies above 99% for MIPs. Applications in high-energy physics have already taken place with several more under study. ; http://www.scienc...
We present a resistive plate chamber (RPC) prototype for time-of-flight measurements over large areas and at high occupancies, minimizing the inter-channel cross-talk. ; http://www.sciencedirect.com/science/article/B6TJM-4D75GPD-9/1/a6fe40c114a867a0f98e2fec0f133503
We show the feasibility of large area timing RPC detectors for experiments dealing with fragmentation-like primary interactions and/or high detector multiplicities, without significative degradation of the detector capabilities. The tested prototype is constituted by three independent cells placed into grounded aluminium boxes, which reduce the cross-talk to the level of 0.4%. Each box consists of a 4-gap glass...
A small positron emission tomography system, based on the timing RPC technology has been built and tested. This first prototype is aimed at validating the expectations, derived from simulations, of a very high spatial resolution, which could be of value for the imaging of small animals. The system is composed of two counting heads, able to measure the photon interaction point in two dimensions, the transaxial d...
Financiadores do RCAAP | |||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |