Estimating bottom properties with a vector sensor array during the Makai 2005 e...

• Autor(es): Santos, P. ; Felisberto, P. ; Jesus, S. M.
• Data: 2007
• Identificador Persistente: http://hdl.handle.net/10400.1/5200
• Origem: Sapientia - Universidade do Algarve
• Assunto(s): Vector sensor; High frequency inversion; Geoacoustic properties; Reflection loss
• Tipo de Documento: Documento de conferência
• Idioma: Inglês

Descrição

Nowadays, vector sensors which measure both acoustic pressure and particle velocity begin to be available in underwater acoustic systems, normally configured as vector sensor arrays (VSA). The spatial filtering capabilities of a VSA can be used, with advantage over traditional pressure only hydrophone arrays, for estimating acoustic field directionality as well as arrival times and spectral content, which could open up the possibility for its use in bottom properties' estimation. An additional motivation for this work is to test the possibility of using high frequency probe signals (say above 2 kHz) for reducing size and cost of actual sub bottom profilers and current geoacoustic inversion methods. This work studies the bottom related structure of the VSA acquired signals, regarding the emitted signal waveform, frequency band and source-receiver geometry in order to estimate bottom properties, specially bottom reflection coefficient characteristics. Such a system was used during the Makai 2005 experiment, off Kauai I., Hawai (USA) to receive precoded signals in a broad frequency band from 8 up to 14 kHz. The agreement between the observed and the modelled acoustic data is discussed and preliminary results on the bottom reflection estimation are presented.