In situ measured cross section geometry of old timber structures and i...

• Autor(es): Lourenço, PB ; Sousa, HS ; Brites, RD ; Neves, LC
• Data: 2012
• Identificador Persistente: http://hdl.handle.net/10362/8063
• Origem: Repositório Institucional da UNL
• Assunto(s): Timber structures; Geometry models; Structural reliability; Biological decay
• Tipo de Documento: Artigo
• Idioma: Inglês

Descrição

Old timber structures may show significant variation in the cross section geometry along the same element, as a result of both construction methods and deterioration. As consequence, the definition of the geometric parameters in situ may be both time consuming and costly. This work presents the results of inspections carried out in different timber structures. Based on the obtained results, different simplified geometric models are proposed in order to efficiently model the geometry variations found. Probabilistic modelling techniques are also used to define safety parameters of existing timber structures, when subjected to dead and live loads, namely self-weight and wind actions. The parameters of the models have been defined as probabilistic variables, and safety of a selected case study was assessed using the Monte Carlo simulation technique. Assuming a target reliability index, a model was defined for both the residual cross section and the time dependent deterioration evolution. As a consequence, it was possible to compute probabilities of failure and reliability indices, as well as, time evolution deterioration curves for this structure. The results obtained provide a proposal for definition of the cross section geometric parameters of existing timber structures with different levels of decay, using a simplified probabilistic geometry model and considering a remaining capacity factor for the decayed areas. This model can be used for assessing the safety of the structure at present and for predicting future performance.