Properties of gypsum-PCM based mortars for interior plastering of construction ...

• Autor(es): Silva, N. ; Aguiar, J. L. Barroso de ; Bragança, L. ; Freire, Teresa ; Cardoso, Isabel
• Data: 2008
• Identificador Persistente: http://hdl.handle.net/1822/12689
• Origem: RepositóriUM - Universidade do Minho
• Assunto(s): Gypsum plasters; PCM; Interior plastering; Energy consumption reduction
• Tipo de Documento: Artigo
• Idioma: Inglês

Descrição

Incorporating phase change materials (PCM) in plasters is an effective solution both for more efficient use of energy and its consumption reduction, because it allows the use of free energy in the environment, by latent heat storage. As PCM has not binder properties, it is expected to decrease mechanical properties of the final mortar. Also the density of the mortar decreases due to PCM lighter specific weight. In order to be used as a final coat for wall plastering, it must verify the requirements of the respective European Standard. This paper presents the results of the composition development and mechanical properties (flexural, compressive and adhesive strengths) testing and validation of three different gypsum mortars, in order to select the appropriate one for thermal testing in test cells. The results show that the effective decrease in the studied characteristics of the mortar does not inhibit the use for plastering, as requirements are achieved by the three studied compositions.