Autor(es):
Ferreira, M. J. F. 
; Rangel, C. M. ; Pinto, A. M. F. R.
Data: 2008
Identificador Persistente: http://hdl.handle.net/10400.9/801
Origem: Repositório do LNEG
Assunto(s): Hydrogen generator
Detalhes do Documento
Hydrogen generation and storage system using sodium borohydride at high pressur...
Descrição
A study is reported on the generation and storage of hydrogen from sodium borohydride (NaBH4) solutions in batch reactors, under pressures up to 4 MPa, in the presence of an improved and reused non-noble nickel-based powered catalyst. It follows references [1-10]. The first two purposes of the present work were to study the influence of the solution medium in the volume of hydrogen generated by hydrolysis of NaBH4, with a specific interest in: (1) comparing the performance of water and viscous-elastic solutions, particularly with poly-acrilic-acid (PAA) and carboxyl-methyl-cellulose (CMC) in water; (2) analysing both the influence of the hydrogen pressure and of the solution medium on the hydrogen solubility during reaction, leading to its storage in the liquid phase inside the reactor. Experimental tests were performed, with and without stirring, under controlled and uncontrolled reaction temperature. The temperature of the reactor medium and the hydrogen evolution were monitored and recorded simultaneously with a data acquisition system using Labview software. To monitor the rate of hydrogen generation, the gas pressure inside the reactor was followed with an appropriate pressure probe. A third goal of the work was to accurately measure the solubility of molecular hydrogen in the liquid phase inside the reactor, after successive loadings of reactant solution. As it is well known, when the pressure of the gas increases so does the hydrogen dissolution in the liquid phase. The cumulative volume of hydrogen generated fed a polymer electrolyte fuel cell stack used in a 100 W-scale integrated mobile application.
A study is reported on the generation and storage of hydrogen from sodium borohydride (NaBH4) solutions in batch reactors, under pressures up to 4 MPa, in the presence of an improved and reused non-noble nickel-based powered catalyst. It follows references [1-10]. The first two purposes of the present work were to study the influence of the solution medium in the volume of hydrogen generated by hydrolysis of NaBH4, with a specific interest in: (1) comparing the performance of water and viscous-elastic solutions, particularly with poly-acrilic-acid (PAA) and carboxyl-methyl-cellulose (CMC) in water; (2) analysing both the influence of the hydrogen pressure and of the solution medium on the hydrogen solubility during reaction, leading to its storage in the liquid phase inside the reactor. Experimental tests were performed, with and without stirring, under controlled and uncontrolled reaction temperature. The temperature of the reactor medium and the hydrogen evolution were monitored and recorded simultaneously with a data acquisition system using Labview software. To monitor the rate of hydrogen generation, the gas pressure inside the reactor was followed with an appropriate pressure probe. A third goal of the work was to accurately measure the solubility of molecular hydrogen in the liquid phase inside the reactor, after successive loadings of reactant solution. As it is well known, when the pressure of the gas increases so does the hydrogen dissolution in the liquid phase. The cumulative volume of hydrogen generated fed a polymer electrolyte fuel cell stack used in a 100 W-scale integrated mobile application.
Tipo de Documento
Documento de conferência
Idioma Inglês
Idioma Inglês
| Financiadores do RCAAP | |||||||
|
|
|
|
|
|
||