Thermoelectric generator using water gas heater energy for battery charging

• Autor(es): Vieira, José António Barros ; Mota, Alexandre Manuel
• Data: 2009
• Identificador Persistente: http://hdl.handle.net/10400.11/1010
• Origem: Repositório Científico do Instituto Politécnico de Castelo Branco
• Assunto(s): Thermoelectric Generator; MPPT; Water gas heater; Battery charge; SEPIC
• Tipo de Documento: Artigo
• Idioma: Inglês

Descrição

“Copyright © [2009] IEEE. Reprinted from 18th IEEE International Conference on Control Applications, 2009. ISBN:978-1-4244-4601-8.This material is posted here with permission of the IEEE. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [e-mail]. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.” This work deals with the design and a prototype implementation of a maximum power point tracker (MPPT) for a thermoelectric (TE) module aiming to improve energy conversion efficiency in battery charging. This system uses TE devices that directly convert heat energy from a water gas heater to electricity to charge a battery. The TE module exhibits a non-linear i-v characteristic and its maximum power point varies with the change of its surfaces temperatures. A SEPIC (single-ended primary inductance converter) DC–DC converter is applied and controlled by a microcontroller and to achieve the maximum power point tracking it is used the perturbation and observation (P&O) algorithm. The microcontroller will also control the charging process of lead-acid battery making an autonomous system that is used to feed the necessary electronics that controls an autonomous gas water heater system. The objectives of this work are to study the principle of TE power generation and to design and develop a TE battery charger that uses heat of a water gas heater system making an autonomous electrical system. The two different charging stages of a lead-acid battery lead us to a good interface board. Finally, experimental results performance of the first stage of charge using P&O MPPT algorithm are presented and compared with the results achieved with the direct connection of the TE module to the battery.