Finite Element Analysis (FEA) applied to heat transfer optimization process of ...

• Autor(es): Silva, Francisco J. G. ; Ferreira, F. ; Costa, C. ; Castro, Ana Cristina Meira ; Meixedo, João Paulo ; Castro, Mário Rui Alvim de ; Santos, R. P. C. ; Ribeiro, M. C. S. ; Fiúza, António ; Dinis, M. L.
• Data: 2011
• Identificador Persistente: http://hdl.handle.net/10400.22/4770
• Origem: Repositório Científico do Instituto Politécnico do Porto
• Assunto(s): Finite element analysis; GFRP pultrusion process; Heating-die; Optimization
• Tipo de Documento: Artigo
• Idioma: Inglês

Descrição

The aim of this study is to optimize the heat flow through the pultrusion die assembly system on the manufacturing process of a specific glass-fiber reinforced polymer (GFRP) pultrusion profile. The control of heat flow and its distribution through whole die assembly system is of vital importance in optimizing the actual GFRP pultrusion process. Through mathematical modeling of heating-die process, by means of Finite Element Analysis (FEA) program, an optimum heater selection, die position and temperature control was achieved. The thermal environment within the die was critically modeled relative not only to the applied heat sources, but also to the conductive and convective losses, as well as the thermal contribution arising from the exothermic reaction of resin matrix as it cures or polymerizes from the liquid to solid condition. Numerical simulation was validated with basis on thermographic measurements carried out on key points along the die during pultrusion process.