Tensile behaviour of single and double-strap repairs on aluminium structures

• Autor(es): Pinto, A. M. G. ; Campilho, Raul ; Mendes, Isabel R. ; Silva, R. F. ; Magalhães, A. G. ; Baptista, A. P. M.
• Data: 2010
• Identificador Persistente: http://hdl.handle.net/10400.22/4280
• Origem: Repositório Científico do Instituto Politécnico do Porto
• Assunto(s): Epoxy adhesive; Experimental testing; Plug filling; Strap repairs
• Tipo de Documento: Artigo
• Idioma: Inglês

Descrição

In this work, an experimental study was performed on the influence of plug filling, loading rate and temperature on the tensile strength of single-strap (SS) and double-strap (DS) repairs on aluminium structures. The experimental programme includes repairs with different values of overlap length (LO=10, 20 and 30 mm), and with and without plug filling. The influence of the testing speed on the repairs strength is also addressed (considering 0.5, 5 and 25 mm/min). Accounting for the temperature effects, tests were carried out at room temperature, 50ºC and 80ºC. This will permit a comparative evaluation of the adhesive tested below and above the Glass Transition Temperature (Tg), established by the manufacturer at 67ºC. The global tendencies of the test results concerning the plug filling and overlap length analyses are interpreted from the fracture modes and typical stress distributions for bonded repairs. According to the results obtained from this work, design guidelines for repairing aluminium structures were recommended.