Taper angle optimization of scarf repairs in carbon-epoxy laminates

• Autor(es): Campilho, Raul ; Pinto, A. M. G. ; Moura, M. F. S. F. de ; Mendes, Isabel R. ; Banea, Mariana D. ; Silva, Lucas F. M. da
• Data: 2008
• Identificador Persistente: http://hdl.handle.net/10400.22/4256
• Origem: Repositório Científico do Instituto Politécnico do Porto
• Assunto(s): Carbon-epoxy; Cohesive zone models; Composite; Finite element analysis; Repair
• Tipo de Documento: Artigo
• Idioma: Inglês

Descrição

The increasing use of Carbon-Fibre Reinforced Plastic (CFRP) laminates in high responsibility applications introduces an issue regarding their handling after damage. The availability of efficient repair methods is essential to restore the strength of the structure. The availability of accurate predictive tools for the repairs behaviour is also essential for the reduction of costs and time associated to extensive tests. This work reports on a numerical study of the tensile behaviour of three-dimensional (3D) adhesively-bonded scarf repairs in CFRP structures, using a ductile adhesive. The Finite Element (FE) analysis was performed in ABAQUS® and Cohesive Zone Models (CZM’s) was used for the simulation of damage in the adhesive layer. A parametric study was performed on two geometric parameters. The use of overlaminating plies covering the repaired region at the outer or both repair surfaces was also tested as an attempt to increase the repairs efficiency. The results allowed the proposal of design principles for repairing CFRP structures.