Optimization of a pressurization methodology for extracting pore-water

• Author(s): Lopes, Isabel ; Ribeiro, Rui
• Date: 2005
• Persistent ID: http://hdl.handle.net/10316/5360
• Origin: Estudo Geral - Universidade de Coimbra
• Subject(s): Squeezing device; Centrifugation; Interstitial water; Sediment; Toxicity; Microtox
• Document Type: Article
• Language: English

Description

Sediment toxicity can be assessed by conducting pore-water toxicity assays with standard water column organisms. Several methods have been developed for sampling pore-water. Centrifugation and pressurization methods are recommended when large volumes of pore-water are required to perform toxicity assays. Nevertheless, these methods involve sediment transportation and storage in laboratory, which can alter sediment toxicity. Therefore, an extraction method for large volumes that could be employed in the field site would be highly desirable. This study aimed to optimize and further evaluate an existing sediment pressurizing device with low construction costs, easy to carry and operate in the field, and presenting minimal chemical reactivity. The latter characteristic was achieved by lining the device interior with Teflon, by using large pore filters (50 [mu]m), and by using an inert gas (nitrogen). Pore-water extraction efficiency and the toxicities of pore-water samples obtained by pressurization and by refrigerated centrifugation were compared. An artificial sediment (70% sand, 20% kaolin and 10% alpha-cellulose) spiked with an alcohol (phenol), a surfactant (SDS), a metal (copper), an organophosphate pesticide (parathion), and a natural sediment contaminated with acid mine drainage, were assayed for toxicity using Microtox assays. Sediment pressurization was found to be as efficient to extract pore-water as centrifugation, being more cost effective and adequate for field use. http://www.sciencedirect.com/science/article/B6V74-4GFCPNM-2/1/cbb0172a719e5520424402dba7d44078