Carbon film resistor electrode for amperometric determination of acetaminophen ...

• Autor(es): Felix, Fabiana S. ; Brett, Christopher M.A. ; Angnes, Lúcio
• Data: 2007
• Identificador Persistente: http://hdl.handle.net/10316/5049
• Origem: Estudo Geral - Universidade de Coimbra
• Assunto(s): Flow injection analysis; Carbon film resistor electrodes; Acetaminophen; Amperometry
• Tipo de Documento: Artigo
• Idioma: Inglês

Descrição

Flow injection analysis (FIA) with amperometric detection was employed for acetaminophen quantification in pharmaceutical formulations using a carbon film resistor electrode. This sensor exhibited sharp and reproducible current peaks for acetaminophen without chemical modification of its surface. A wide linear working range (8.0 × 10-7 to 5.0 × 10-4 mol L-1) in phosphate buffer solution as well as high sensitivity (0.143 A mol-1 L cm-2) and low submicromolar detection limit (1.36 × 10-7 mol L-1) were achieved. The repeatability (R.S.D. for 10 successive injections of 5.0 × 10-6 and 5.0 × 10-5 mol L-1 acetaminophen solutions) was 3.1 and 1.3%, respectively, without any memory effect between injections. The new procedure was applied to the analyses of commercial pharmaceutical products and the results were in good agreement with those obtained utilizing a spectrophotometric method. Consequently, this amperometric method has been shown to be very suitable for quality control analyses and other applications with similar requirements. http://www.sciencedirect.com/science/article/B6TGX-4MSHT96-1/1/a5eb87f817e43c4bd0120021afa851f3