Improving the environmental performance of bedding products by using life cycle...

• Autor(es): Lanoë, Thomas ; Simões, Carla L. ; Simoes, Ricardo
• Data: 2013
• Identificador Persistente: http://hdl.handle.net/11110/291
• Origem: CiencIPCA
• Assunto(s): Life cycle assessment; Product design; Materials selection; End-of-Life management; Mattresses
• Tipo de Documento: Artigo
• Idioma: Inglês

Descrição

Improvement of the environmental performance of processes and products is a common objective in industry, and has been receiving increased attention in recent years. The main objective of this work is to evaluate the potential environmental impact of two bedding products, a polyurethane foam mattress (PFM) and a pocket spring mattress (PSM). These two types are the most common mattresses used in Europe. A Life Cycle Assessment (LCA) shows that the PFM has a higher environmental impact than the PSM. For both products the main cause of environmental impact is the manufacturing process, respectively the polyurethane foam block moulding process for the PFM, and the pocket spring nucleus process for the PSM. A scenario analysis shows the possibility of reducing the environmental impact of the products’ life cycle using an alternative End-of-Life scenario, resorting to incineration rather than landfill. Two strategies were also studied in order to reduce the environmental impact of the PFM: (1) reutilization of foam that was sent to the waste system management, and (2) a 20% weight reduction of the polyurethane foam. The second strategy has proven to be the most effective. Foundation for Science and Technology (FCT)